Search

Achieving sustainability and efficiency in maintaining high crop yields while minimizing agricultural chemical pollution requires precise weed mapping to fully deploy site-specific weed management—a persistent, major hurdle in contemporary farming. This investigation tested the resilience of training epochs for the You Only Look Once (YOLO) v5s convolutional neural network (CNN) model in building an automated system for classifying crops and weeds from UAV-acquired imagery. The images were labeled with bounding boxes and trained on Google Colab across 100, 300, 500, 600, 700, and 1000 epochs. The network identified and sorted five distinct categories: sugarcane (Saccharum officinarum), banana trees (Musa), spinach (Spinacia oleracea), pepper (Capsicum), and weeds. Training proceeded over multiple epochs to pinpoint the peak test-set performance and was terminated once the test metrics (overall accuracy, precision, and recall) began to decline. The findings reveal a marked improvement in classifier capability as the epoch count climbed from 100 to 600. However, a modest reduction surfaced at 700 epochs, where overall accuracy, weed precision, and recall registered 65, 43, and 43%, respectively, contrasted with the 67, 78, and 34% achieved on these same metrics at 600 epochs. This erosion continued at 1000 epochs, producing an overall accuracy of 65%, a weak precision of 45%, and a recall of 40%. These outcomes confirm that the training epoch length in YOLOv5s substantially governs the model’s reliability for automated crop and weed discrimination, singling out 600 epochs as the optimal performance point.

In some Asian countries, jute is a fundamental source of revenue and contributes to Gross Domestic Product (GDP). Like other crops, jute is vulnerable to pest invasions, and detecting them often relies on visual inspection in countries such as Bangladesh, India, Myanmar, and China. This practice is also slow, difficult, and somewhat inaccurate, posing a significant economic risk. To mitigate this challenge, the investigation proposes a highly accurate and resilient transfer learning (TL)- based JutePestDetect model for detecting jute pests at their initial stages. To begin with, we assembled a jute pest collection comprising 17 categories and roughly 380 images per category, which were scrutinized after manual and automated preprocessing and refinement, including background removal and scaling. Following this, five distinguished pre-trained architectures—DenseNet201, InceptionV3, MobileNetV2, VGG19, and ResNet50—were picked from an earlier work to formulate the JutePestDetect model. Every architecture was adjusted by replacing the classification layer with a global average pooling layer and inserting a dropout layer for regularization. For performance measurement, a range of indicators, including precision, recall, F1 score, ROC curve, and confusion matrix, were used. These examinations provided a deeper understanding of the models’ capabilities. Within this set, the proposed JutePestDetect model, based on a tailored regularized DenseNet201, outperformed its counterparts, achieving an outstanding accuracy of 99%. Hence, our suggested method and tactics deliver a refined solution for pest recognition specific to jute, with the potential to substantially assist cultivators worldwide.

In contemporary farming, visual perception systems grounded in deep learning are emerging to equip autonomous vehicles with the capability to perform crop-field interventions. Yet securing strong performance from these techniques hinges on access to large volumes of data, a resource that is typically scarce in agricultural contexts. The core reason is that constructing an agricultural dataset that captures a given problem in exhaustive breadth is difficult, since the visual presentation of symptoms is subject to change. There is pronounced sensitivity to ambient variables such as heat, dampness, and lighting regimes. An efficient pipeline is therefore imperative to methodically shepherd the full sequence of building an agricultural dataset, from initial image capture through to its web-facing release. This manuscript describes the Eden Library, a platform conceived to help close the recognized shortfall in freely available crop and plant repositories that span both close-range and overhead imagery. The end-to-end workflow underpinning the platform’s conception and launch is also set forth and explored. This workflow merits attention because the datasets on offer are designed not as static, one-off research outputs confined to a narrow slice of species, growth stages, and environmental circumstances, but rather as evolving resources to be stewarded and expanded across time. Annotations delineating plants and their associated symptoms are supplied, thereby relieving users of the manual labeling workload. At the time of writing, the Eden Library spans 15 distinct crop species, 9 weed varieties, and 30 forms of disorder (encompassing pests, diseases, and nutritional shortfalls). The Eden Library endeavors to narrow this divide by delivering a voluminous, richly varied image trove of plants, curated coherently, to accelerate the development of future vision-driven, AI-augmented field tools.

This paper delivers an interview-based investigation and literature analysis examining the potential benefits and barriers to adopting Artificial Intelligence (AI) in farming enterprises. Three branches of agriculture are examined: crop cultivation, dairy farming, and beef farming. As groundwork for the study, a literature analysis re-evaluates earlier work on intelligent farming. Subsequently, an interview study with 21 participants examines receptivity and readiness for intelligent farming tools and provides technical detail on three selected AI applications in agriculture. Though centered on circumstances in Sweden, the results apply to the wider European agricultural context and beyond. The study uncovers a broad range of elements that both promote and hinder the transition. Chief among the recognized opportunities are the strategic weight intelligent farming carries on the agendas of numerous sector players, the overall shift toward software-as-a-service models through co-owned equipment, the enormous stockpiles of existing data, and the substantial eagerness among farmers for novel technology. Conversely, the study highlights primary obstacles, including technical and legal difficulties related to data ownership, looming cybersecurity threats, the need for a clearly articulated economic rationale, and the occasional lack of technical competence within the sector. The paper finds that the overarching direction signals a shift toward intelligent farming, but the pace of change will depend on how well the identified barriers are resolved.

Digital twins are increasingly discussed as a next step in smart farming because they promise to connect physical agricultural systems with digital representations, sensor data, simulation models, analytics, and decision-support functions. However, the agricultural literature remains uneven in how it defines, architects, enables, and applies digital twins across crop, livestock, greenhouse, irrigation, and farm-management systems. This original scoping review maps the peer-reviewed literature on digital twins in smart farming with attention to architecture types, enabling technologies, data requirements, application domains, implementation challenges, and research gaps. The review follows a scoping logic rather than an effect-estimation or performance-benchmarking design: it charts how studies conceptualize digital twins, distinguishes full or emerging digital twin capability from static models and monitoring dashboards, and classifies evidence by architecture, technology, data pipeline, analytics function, feedback mechanism, implementation stage, and limitation. The synthesis shows that agricultural digital twins are commonly positioned as cyber-physical and decision-support infrastructures that may combine IoT sensing, remote sensing, machinery and environmental data, cloud or edge computing, simulation, AI analytics, visualization, and farm-management interfaces. Application clusters are strongest in controlled-environment agriculture, irrigation and water management, crop monitoring, aquaponics, livestock monitoring, greenhouse visualization, and emerging optimization or automation settings. Across the mapped literature, the main contribution is a structured classification of digital twin architectures and application patterns while preserving conceptual caution: real-time data, AI prediction, or visualization alone does not create a digital twin. The review identifies future research needs in architecture standardization, semantic interoperability, field validation, real-time updating, uncertainty communication, data governance, farmer-centered usability, scalability, and sustainability assessment.

Data science has become a central analytical foundation of precision agriculture, enabling researchers and practitioners to transform heterogeneous farm, crop, soil, climate, machinery, sensor, and remote-sensing data into decision-relevant knowledge. This original bibliometric and thematic review examines how precision agriculture data science has evolved as a research field, how its knowledge structures are organized, and which methodological and application frontiers are shaping its future direction. The review follows a transparent bibliometric logic by distinguishing database searching, eligibility screening, metadata cleaning, keyword normalization, bibliometric indicators, thematic mapping, and interpretive synthesis. Because verified database-export counts were not available in the present working environment, the manuscript does not report invented publication totals, citation rankings, cluster sizes, or network metrics. Instead, it develops a cautious bibliometric-thematic framework grounded in the approved reference set and in clearly stated methodological safeguards. The review focuses on research evolution from early sensor analytics and remote observation toward machine learning, deep learning, big data, IoT-enabled systems, data fusion, decision support, and sustainable smart farming. It also examines knowledge structures around journals, keywords, co-occurrence logic, thematic clusters, and emerging research fronts. The main contribution is an integrated synthesis of precision agriculture data science as a field shaped by technical innovation, methodological fragmentation, data-quality constraints, interoperability challenges, explainability needs, reproducibility demands, and farmer-centered implementation concerns. The review provides a future agenda for more robust, transparent, usable, and responsible data science in precision agriculture.

Sustainable precision agriculture increasingly depends on the convergence of artificial intelligence, robotics, automation, and Internet of Things technologies rather than on isolated digital tools. This integrative review synthesizes how these technology domains interact across sensing, data transmission, analytics, decision support, robotic or automated actuation, and feedback within sustainability-oriented farming systems. The review uses a curated peer-reviewed literature selection and an integrative evidence-charting logic to map technology domains, agricultural applications, integration mechanisms, decision functions, sustainability relevance, and system-level challenges. The AI focus includes machine learning, deep learning, computer vision, predictive analytics, data fusion, and decision-support models used for crop monitoring, yield estimation, input optimization, pest and disease detection, and risk forecasting. The robotics and automation focus covers autonomous field robots, UAVs, smart machinery, task execution, and automated farm operations. The IoT and sensing focus includes wireless sensor networks, distributed monitoring, machinery telemetry, remote sensing, cloud and edge computing, and data platforms. The synthesis shows that technology convergence may support resource-efficient, climate-sensitive, and more responsive farm management, but only when data quality, interoperability, field robustness, explainability, affordability, governance, usability, and farmer or advisor feedback are addressed. The review contributes a system-level framing of sustainable precision agriculture as a socio-technical feedback system in which digital sensing, AI interpretation, automated action, and human decision-making must be jointly designed. Future research should prioritize validated, interoperable, transparent, and farmer-centered integration pathways rather than assuming that more automation or more data automatically improves sustainability outcomes.

Digital twins are increasingly proposed as cyber-physical representations that may support precision agriculture through monitoring, simulation, prediction, optimization, and decision support. However, agricultural systems described as digital twins vary substantially in data quality, interoperability, synchronization, modelling depth, predictive reliability, decision functionality, validation, and operational governance. This article proposes a conceptual maturity framework that evaluates agricultural digital twins through capability progression rather than technology adoption alone. The framework begins with descriptive monitoring and advances through real-time farm representation, simulation and scenario analysis, prediction and optimization, and supervised autonomous decision support. Monitoring maturity depends on reliable sensing, remote sensing, Internet of Things integration, data fusion, spatial and temporal adequacy, traceability, and human-interpretable representation. Simulation and prediction maturity require explicit farm-system boundaries, calibrated models, uncertainty estimation, local validation, and evidence that analytical outputs remain valid for their intended context. Optimization maturity additionally requires transparent objectives, constraints, robustness assessment, and distinction between predictive accuracy and decision value. The highest proposed level permits only narrowly bounded and supervised decision initiation supported by human authority, explainability, safety mechanisms, governance, cybersecurity where relevant, and continuous feedback. The framework does not constitute a validated maturity standard or establish agronomic, environmental, economic, or autonomous decision benefits. Its principal contribution is an integrated structure for assessing capability readiness, identifying progression barriers, and preventing monitoring, simulation, prediction, or optimization functions from being overinterpreted as evidence of deployment-ready autonomy.

Artificial intelligence is increasingly embedded in precision agriculture through sensing, remote observation, predictive modelling, automated classification, and decision-support applications. Technical performance alone, however, is insufficient for determining whether these systems are responsibly designed or appropriately used. This article proposes an original governance framework that connects agricultural context definition, farm-data governance, transparency, explainability, accountability, sustainability assessment, farmer participation, human oversight, risk safeguards, implementation-readiness review, monitoring, and adaptive feedback. The framework treats transparency as a requirement for documenting data provenance, data quality, model assumptions, system limitations, and decision pathways, while explainability is positioned as a task-specific means of supporting interpretation rather than proof of model validity. Accountability is structured through explicit allocation of responsibilities among developers, platform providers, data stewards, advisors, farmers, and oversight actors. Environmental, social, and economic sustainability are assessed alongside digital inclusion, usability, local relevance, farmer autonomy, and trust-building conditions. The framework also addresses algorithmic opacity, bias, model drift, poor local calibration, data misuse, cybersecurity, automation dependence, accountability gaps, and implementation overclaiming. Its principal contribution is a layered, adaptive governance model for responsible agricultural decision support. The framework supports governance planning and research design but does not establish empirical validity, legal compliance, policy acceptance, farmer approval, sustainability performance, trust, certification, or deployment readiness.

Precision agriculture is increasingly shaped by sensors, remote sensing, artificial intelligence, automated machinery, digital platforms, and data-driven decision support. However, technical capability alone does not establish whether a smart farming system is usable, locally appropriate, socially responsible, environmentally beneficial, resilient under disruption, or worthy of farmer reliance. This conceptual article proposes a human-centered precision agriculture framework that places farmers, farm workers, agricultural advisors, local knowledge, farm conditions, usability, accessibility, explainability, decision confidence, human oversight, and responsible governance at the center of system design. The framework integrates sustainability and resilience assessment with user-centered artificial intelligence, participatory design, transparent data practices, uncertainty communication, accountable decision support, and iterative learning. It distinguishes decision confidence from decision quality, explainability from guaranteed trust, participation from assured adoption, and technological potential from demonstrated sustainability or resilience. The proposed structure organizes human-centered smart farming into interconnected stages covering problem definition, stakeholder mapping, farmer-needs assessment, data and system context, sustainability and resilience requirements, explainability design, participation, oversight, governance, evaluation, and feedback. Its main contribution is a socio-technical framework for structuring research and design priorities while maintaining explicit boundaries around empirical validation, farmer autonomy, responsible implementation, and claims of system readiness.

Decision-support systems are increasingly positioned as mechanisms for translating agricultural data and analytical models into farm-management recommendations, yet their methodological quality cannot be judged through predictive performance alone. This article proposes an original methodological framework for designing and evaluating decision-support systems in precision agriculture. The framework integrates farm-management decision-context definition, stakeholder mapping, data-quality and provenance assessment, model and recommendation-logic documentation, explainability and interpretability requirements, usability and farmer-centered design, validation planning, decision-reliability assessment, adoption-barrier analysis, implementation-condition assessment, human oversight, and iterative feedback. Explainability is treated as a role-sensitive design requirement involving input visibility, output explanation, decision rationale, uncertainty communication, traceability, and appropriate explanation timing and format. Usability is addressed through farmer participation, co-design, workflow integration, accessibility, local relevance, manageable decision-support workload, training, and feedback mechanisms. Validation is extended beyond internal model testing to include external and local validation, calibration, error analysis, field-validation planning, drift monitoring, and review of the complete recommendation pathway. Adoption is interpreted as a contextual and voluntary process shaped by perceived usefulness, trust, affordability, infrastructure, digital capability, interoperability, support, and governance. Human oversight remains necessary because neither technical performance nor explanation quality independently establishes decision reliability. The framework contributes a structured method for coordinating design and evaluation activities while retaining explicit boundaries against claims of guaranteed decision quality, adoption, or deployment readiness.

Precision agriculture generates expanding volumes of sensor, machinery, remote-sensing, weather, soil, crop, livestock, operational, input-use, resource-use, and farm-management data. Although these data are commonly collected for immediate production purposes, they may also support sustainability reporting, environmental accountability, agricultural finance, insurance, and risk assessment. Such secondary use creates the possibility of a circular data economy in which curated farm data are responsibly reused across several applications and subsequently improved through feedback. This article proposes an original conceptual architecture for organizing these reuse pathways while preventing circularity from becoming uncontrolled extraction, opaque scoring, or unequal value capture. The architecture connects farm data generation and collection with quality and provenance review, metadata curation, consent and purpose limitation, data stewardship, interoperability, production analytics, sustainability reporting, finance and insurance applications, farmer protection, auditability, and feedback updating. It distinguishes analytical usefulness from implementation readiness and places governance gates before each consequential reuse pathway. Production reuse is treated as conditional decision support rather than a productivity guarantee; sustainability reuse is treated as bounded evidence rather than automatic reporting accuracy; and finance or insurance reuse is subject to data-quality, bias, fairness, transparency, and dispute requirements. The principal contribution is a structured circular data economy architecture that clarifies how agricultural data may circulate across domains while preserving farmer agency, contextual integrity, accountability, and explicit legal, financial, insurance, and deployment boundaries.

Foundation models are increasingly investigated as reusable architecture-level systems for agricultural sensing, remote-sensing interpretation, multimodal learning, knowledge access, phenotyping, monitoring, and decision-support assistance. However, the evidence remains dispersed across model families, data modalities, agricultural applications, and validation settings. This systematic review synthesises the technical architectures, data requirements, opportunities, risks, deployment challenges, evidence gaps, and research priorities associated with foundation models in smart farming and precision agriculture. Peer-reviewed journal literature was identified through structured database and publisher-platform searches, supplementary reference checking, predefined eligibility criteria, sequential screening, claim-specific evidence extraction, and thematic synthesis. Evidence was organised across language, vision, vision-language, multimodal, geospatial, remote-sensing, time-series, self-supervised, transfer-learning, and domain-adaptation approaches. The reviewed literature indicates that foundation-model approaches may support transferable representation learning, reduced annotation dependence, multimodal data integration, crop and livestock monitoring, remote-sensing analysis, plant phenotyping, agricultural knowledge services, and bounded decision-support workflows. Nevertheless, reported results are commonly task-, dataset-, region-, sensor-, or application-specific. Important limitations include agricultural data scarcity and heterogeneity, geographic and temporal domain shift, uncertain generalisation, bias, weak explainability, inadequate uncertainty communication, privacy and cybersecurity risks, unclear accountability, computing demands, and limited farmer-centred or operational evaluation. Priorities include agricultural benchmark suites, domain-specific pretraining resources, multimodal and spatiotemporal adaptation, low-resource representation, robustness testing, calibrated uncertainty, human-in-the-loop evaluation, privacy-preserving development, sustainable-computing assessment, and lifecycle governance. Foundation models represent a promising research direction, but benchmark performance or pretraining scale alone does not establish agronomic validity, operational safety, farmer trust, or deployment readiness.

Generative artificial intelligence is emerging as a potentially important component of precision agriculture through its capacity to create synthetic data, generate agricultural imagery, retrieve and reformulate knowledge, support conversational advisory interfaces, and assist decision-support workflows. However, evidence of technical feasibility is developing faster than evidence of agronomic validity, reliability, farmer-centred usefulness, and responsible deployment. This critical review evaluates generative AI as a distinct agricultural technology class, with particular attention to generative adversarial networks, diffusion models, variational autoencoders, large language models, vision-language models, foundation models, fine-tuning, prompting, domain adaptation, and retrieval-augmented generation. It critically examines the proposed use of synthetic crop, disease, weed, pest, and remote-sensing data for augmentation, class-imbalance mitigation, and label-scarcity support, while emphasizing image realism, biological plausibility, source-data quality, and synthetic-real domain gaps. The review also assesses generative decision support and advisory systems, distinguishing accessible language generation and knowledge retrieval from agronomically validated recommendations. Reliability concerns include hallucination, factual inaccuracy, uncertainty underreporting, poor local adaptation, robustness limitations, benchmark insufficiency, and failures of human oversight. Responsible deployment further requires data governance, privacy protection, accountability, transparency, explainability, farmer trust, digital inclusion, risk monitoring, and assessment of computational and sustainability costs. The review contributes an integrated opportunity-risk interpretation and identifies priorities for domain-specific benchmarks, synthetic-data validation, hallucination measurement, uncertainty-aware assistance, human-in-the-loop evaluation, farmer-centred design, governance documentation, and cautious field-readiness assessment.

Remote sensing and machine learning have become prominent components of smart farming research, generating an expanding body of review literature across agricultural monitoring and prediction applications. This umbrella review synthesises review-level evidence concerning crop monitoring, disease detection, yield forecasting, and decision support while examining the methodological conditions that shape evidence strength and transferability. Peer-reviewed systematic reviews, scoping reviews, structured reviews, surveys, meta-reviews, and other eligible review-level articles were identified through searches of major academic databases and publisher platforms. Evidence was organised by application domain, sensing modality, analytical method, validation design, generalisation, uncertainty, reproducibility, and decision-support relevance. Crop-monitoring reviews describe extensive use of satellite, unmanned aerial vehicle, multispectral, hyperspectral, thermal, and multimodal data for crop mapping, growth assessment, phenotyping, stress monitoring, and related applications. Disease-detection reviews report rapid expansion of image-based machine learning and deep learning, but repeatedly identify data scarcity, class imbalance, curated-image dependence, and limited cross-context validation. Yield-forecasting reviews identify recurring integration of remote sensing, weather, soil, crop-model, and management information, although forecast horizons, spatial and temporal validation, uncertainty communication, and decision relevance remain inconsistent. Across domains, reported technical promise is moderated by heterogeneous datasets, benchmark inconsistency, review overlap, incomplete reproducibility, and limited evidence of transfer across crops, regions, seasons, and acquisition conditions. Review-level evidence supports a substantial research opportunity for remote sensing and machine learning in smart farming, but it does not independently establish field readiness, diagnostic reliability, operational forecasting performance, or deployment readiness. Stronger review reporting, external validation, transparent benchmarking, uncertainty assessment, reproducible workflows, and responsible decision-support evaluation are required.

Edge Artificial Intelligence and Tiny Machine Learning are increasingly discussed as approaches for moving selected analytical functions from remote cloud infrastructure to low-power devices located closer to agricultural data sources. Their potential relevance to precision agriculture lies in supporting local sensing, classification, monitoring, and decision-assistance functions where continuous connectivity, high-performance computing, or extensive data transmission may be impractical. This framework-oriented review examines Edge AI and TinyML through four connected dimensions: low-power intelligence, embedded farm systems, agricultural deployment constraints, and farm-scale applications and implementation barriers. The review distinguishes on-device inference and near-sensor intelligence from conventional agricultural Internet of Things sensing, generic wireless sensor networks, cloud-based artificial intelligence, and non-embedded machine-learning applications. It organizes the reviewed evidence around embedded hardware, model compression, memory, latency, energy use, sensor quality, connectivity, environmental exposure, calibration, maintenance, usability, affordability, local validation, cybersecurity, privacy, and human oversight. The synthesis indicates that compact inference can reduce reliance on continuous cloud access in appropriately designed systems, but miniaturized models alone do not establish accuracy, robustness, affordability, usability, sustainability, or deployment readiness. Farm-scale usefulness remains conditional on the quality of sensing systems, hardware-aware model design, environmental testing, lifecycle maintenance, locally relevant validation, and clear responsibility for system oversight. The main contribution is a framework that connects technical design choices with deployment conditions, implementation boundaries, and a research and practice agenda for evaluating low-power agricultural intelligence without converting prototype feasibility into unsupported operational claims.

Smart farming technologies are often presented as innovations whose adoption depends mainly on technical availability, economic advantage, or farmer willingness. Such interpretations do not adequately explain why similar technologies are adopted and sustained in some settings but resisted, selectively used, discontinued, or abandoned in others. This realist review develops an explanatory synthesis of smart farming adoption through context–mechanism–outcome reasoning. It examines how farm structure, farmer capability, financial resources, infrastructure, connectivity, advisory support, institutional conditions, social legitimacy, platform relations, and data governance influence farmers’ interpretations of technological opportunities and risks. Adoption is distinguished from technology acceptance, partial adoption, sustained use, discontinuance, abandonment, and implementation failure. Enabling mechanisms include perceived usefulness, compatibility, trust, decision confidence, credible value, and experiential learning. Constraining mechanisms include affordability concern, return uncertainty, complexity, privacy concern, autonomy concern, platform dependency, and maintenance burden. The synthesis indicates that no contextual factor or mechanism independently guarantees adoption or implementation success. Similar technologies may generate different outcomes because farmers encounter different resources, constraints, relationships, and implementation experiences. The review proposes a recursive programme theory in which appraisal, trial, implementation experience, feedback, and changing farm conditions continually reshape perceived value, trust, capability, and willingness to continue. Responsible implementation therefore requires context-sensitive evaluation, farmer-centered usability assessment, reliable infrastructure, credible advisory and technical support, interoperability, transparent data governance, and attention to exclusion. The proposed configurations support explanatory synthesis and empirical testing rather than universal prediction or implementation prescription.

Foundation models are becoming relevant to precision agriculture because they can connect sensing, remote sensing interpretation, multimodal data integration, knowledge retrieval, advisory communication, and farm decision-support workflows. Their broad capability, however, does not establish agronomic validity, trustworthy performance, operational safety, or deployment readiness. This article develops an original governance and technical safeguard framework for responsible agricultural foundation models. The framework treats these models as potential components of decision infrastructure and integrates trustworthy artificial intelligence requirements with data governance, validation, human oversight, farmer participation, monitoring, and explicit claim boundaries. It identifies requirements concerning data quality, provenance, documentation, transparency, explainability, interpretability, uncertainty communication, robustness, generalization, bias, fairness, privacy, cybersecurity, accountability, auditability, and traceability. It also maps risks arising from opaque pretraining data, uncertain data control, hallucination, factual error, agronomic invalidity, platform dependency, model drift, data drift, and unclear responsibility. Technical safeguards include data screening, domain-adaptation assessment, external and local validation, robustness testing, bias and fairness review, factual and agronomic checking, human-in-the-loop review, and continuing monitoring. Responsible deployment principles add purpose limitation, context sensitivity, incident response, withdrawal planning, and non-autonomy boundaries. The contribution is a structured conceptual framework that connects governance questions with technical evidence and accountable actors without claiming legal compliance, guaranteed trustworthiness, farmer approval, or deployment readiness.

Generative artificial intelligence is creating new possibilities for conversational access to agricultural information, farm data, and decision-support resources. However, fluent interaction does not establish factual accuracy, agronomic validity, farmer trust, or operational safety. This article proposes an original conceptual architecture for generative AI-enabled farm advisory systems in precision agriculture. The architecture treats conversational decision support as a governed socio-technical process rather than a standalone chatbot function. It connects farm advisory use-case definition, farmer query interpretation, heterogeneous agricultural data inputs, curated knowledge retrieval, generative model layers, response grounding, advisory-output controls, uncertainty communication, human oversight, expert escalation, farmer feedback, monitoring, and controlled system updating. Sensor observations, remote-sensing products, weather information, soil and crop data, farm-management records, and textual agricultural knowledge are positioned behind data-quality, provenance, documentation, and access-control requirements. Foundation models, large language models, vision-language models, multimodal models, prompting, domain adaptation, and retrieval-augmented generation are treated as optional architectural components whose appropriateness depends on the bounded advisory task. The architecture further distinguishes factual checking from agronomic validity review and separates farmer-facing explanations from advisor-facing evidence assessment. Safety and trust requirements include risk classification, hallucination monitoring, privacy, cybersecurity, auditability, farmer autonomy, explicit advisory boundaries, and escalation pathways. The principal contribution is a structured framework for designing and evaluating conversational farm advisory systems without implying autonomous decision authority, validated agronomic advice, guaranteed trust, operational safety, or deployment readiness.

Climate-smart precision agriculture is increasingly discussed as a means of connecting farm data, environmental observation, and analytical modeling with climate adaptation, mitigation-relevant assessment, and resilience planning. However, data availability and predictive capability alone do not establish climate benefit, decision reliability, or farm readiness. This article proposes a conceptual data-science framework that organizes climate-smart use-case definition, farm-context mapping, multi-source data integration, adaptation analytics, mitigation-relevant analysis, climate-risk modeling, uncertainty assessment, resilience-oriented decision support, sustainability feedback, monitoring, and governance safeguards. The framework distinguishes climate hazards, exposure, vulnerability, adaptive capacity, forecasting, scenario analysis, and operational decision support while preserving boundaries between analytical indicators and verified outcomes. Remote sensing, sensors, weather and climate records, soil and crop observations, water and resource-use data, machine learning, geospatial analysis, time-series modeling, and data fusion are positioned as conditional inputs and methods rather than automatic sources of climate benefit. The framework also requires local validation, uncertainty communication, farmer participation, human oversight, data-quality assessment, provenance, interoperability, and feedback updating. Its main contribution is an integrated architecture for interpreting how data-science functions may support climate-smart precision agriculture without presenting modeled outputs as guaranteed adaptation, verified mitigation, proven resilience, carbon accounting, or deployment readiness. The article therefore frames climate-smart precision agriculture as a governed learning system whose value depends on evidence quality, contextual interpretation, transparent limitations, and iterative assessment.

Artificial intelligence is increasingly embedded in smart farming systems, yet explanation requirements are often treated as a single technical attribute rather than as stakeholder-dependent needs. This article develops a conceptual taxonomy of explainability requirements across agricultural decision contexts. The taxonomy approach distinguishes stakeholders by their roles, decision consequences, explanation purposes, required explanation objects, usability expectations, accountability needs, trust risks, and implementation boundaries. Farmers may require accessible, locally relevant, actionable, and uncertainty-aware explanations that preserve autonomy. Agronomists and advisors may require model logic, input relevance, data-quality information, output rationale, limitations, and evidence supporting professional validation. Regulatory stakeholders may require traceability, documentation, auditability, risk justification, and clear responsibility allocation. Platform providers, technology providers, data intermediaries, system operators, and data stewards may require lifecycle transparency, monitoring information, provenance records, version histories, and incident reconstruction. Supply-chain and sustainability actors may require interpretable provenance and decision boundaries without treating explanation as proof of quality, sustainability, or compliance. The taxonomy also identifies failures including under-explanation, over-explanation, misleading explanations, uncertainty omission, explanation overload, false confidence, provenance opacity, accountability gaps, and trust miscalibration. Its main contribution is a structured account of how explanation requirements change across stakeholders and decision settings. The taxonomy is conceptual and requires stakeholder validation, usability testing, governance assessment, and domain-specific evaluation before operational application.

Autonomous farming is emerging as a precision agriculture frontier in which sensing, environmental awareness, reasoning, decision logic, robotic action, and adaptive feedback are linked within increasingly integrated technical systems. Yet autonomy in agriculture cannot be reduced to unattended machine operation because field environments are variable, data quality is uneven, physical actions are consequential, and farmers and operators retain essential contextual and supervisory roles. This article develops an original conceptual model for analysing autonomous farming systems as supervised socio-technical architectures rather than self-sufficient farm managers. The model is constructed through conceptual synthesis of agricultural robotics, computer vision, machine learning, navigation, control, human–robot interaction, and responsible innovation scholarship. It organizes autonomy into connected layers: use-case definition; sensing and environmental awareness; data quality and fusion; reasoning, planning, and uncertainty interpretation; acting, control, and robotic execution; learning, feedback, and drift monitoring; and human oversight, safety, accountability, and governance. The main contribution is a closed-loop account of how farm observations may become bounded robotic actions only when perception is validated, reasoning is contextually interpreted, plans remain within operating constraints, execution is monitored, and human intervention remains available. Learning is treated as governed model updating rather than automatic self-improvement. The model therefore clarifies both enabling relationships and non-guarantee boundaries: conceptual integration alone does not establish safe autonomous operation, productivity improvement, legal sufficiency, or deployment readiness. It offers a structured basis for future research, local validation planning, supervisory design, and responsible assessment of autonomous farming within precision agriculture.

Artificial intelligence is becoming embedded in precision agriculture through data-intensive monitoring, predictive models, digital platforms, advisory systems, robotics, and automated machinery. These arrangements complicate accountability because consequential outputs may result from interactions among data providers, model developers, platform operators, advisors, machinery manufacturers, system integrators, service providers, and farm operators rather than from a single actor or technical component. This article proposes a conceptual accountability framework for examining AI liability issues across agricultural AI systems without treating accountability mapping as a substitute for legal interpretation. The framework begins with agricultural use-case definition and stakeholder-role mapping, then examines data-level duties concerning quality, provenance, access, control, privacy, cybersecurity, and governance. It further maps model-level responsibilities for documentation, validation, robustness, bias assessment, explainability, uncertainty communication, and drift monitoring. Platform and advisory layers are addressed through governance, interface design, monitoring, escalation, human review, professional interpretation, and farmer-autonomy requirements. Machinery, automation, and operational risks are incorporated through control-system responsibilities, sensor-to-actuator traceability, supervisory control, fail-safe design, maintenance, incident reporting, and operational boundaries. The framework also identifies liability gaps created by fragmented evidence, unclear validation ownership, platform ambiguity, ineffective human oversight, and incomplete traceability. Its contribution is a structured method for clarifying responsibility pathways, evidence needs, decision boundaries, and governance gaps across interconnected agricultural AI layers. The framework is conceptual and does not determine legal liability, establish compliance, certify safety, allocate blame, or demonstrate deployment readiness.

Precision agriculture depends on distributed data from sensors, remote sensing, machinery, crop and livestock monitoring, weather services, and farm-management systems. Collaborative model development can use these resources, yet central collection may intensify privacy, ownership, access, control, cybersecurity, participation, and secondary-use concerns. This article proposes a conceptual federated learning architecture in which farms retain raw data locally while contributing model updates to coordinated cross-farm learning. The architecture integrates use-case definition, stakeholder and governance mapping, farm-data sensitivity assessment, provenance and quality review, local node configuration, local model training, protected update exchange, secure aggregation, global and local evaluation, cross-farm validation, heterogeneity assessment, privacy safeguards, security controls, drift monitoring, auditability, and farmer feedback. It distinguishes horizontal federated learning from conditional vertical and transfer configurations and connects these principles to bounded agricultural use cases, including crop monitoring, disease detection, yield prediction, remote-sensing interpretation, livestock monitoring, and human-reviewed decision support. Secure aggregation, differential privacy, homomorphic encryption, and trusted execution environments are treated as context-dependent safeguards rather than guarantees. The contribution links decentralized model development with governance, accountability, communication constraints, non-identically distributed data, validation, monitoring, and claim boundaries. It supports research and design but does not establish certification, legal compliance, superiority, farmer approval, operational safety, or deployment readiness.